Installation guide

Quasar CP-3211/CP-4221 User and Installation Guide

Time Zone

Select the time zone from the drop-down menu.

Enable Daylight Saving Time

To enable DST, check the box and then specify time offset and DST duration. The format for time

offset is [hh:mm:ss]. For example, if the amount of time offset is one hour, enter 01:00:00 in the

field.

Time (Date) Format

Enables a choice of formats: either year, month and day (yyyy/mm/dd) or day, month and year

(dd/mm/yyyy).

Sync with Computer Time

Select this button to synchronize video date and time display with the PC.

Manual

The Administrator can set video date, time and day manually. Entry format should be identical with

that shown next to the Enter field.

Sync with NTP Server

Network Time Protocol (NTP) is an alternate way to synchronize the camera’s clock with an NTP

server. Specify the server to synchronize in the Enter field. Then select an update interval from the

drop-down menu. For further information about NTP, visit www.ntp.org.

7.3.2 Security

Clicking the Security tab in the System screen opens a drop-down menu with the tabs: User, HTTPS,

IP Filter and IEE 802.1X.

Figure 29: System Configuration – Security Screen