Installation guide

Configuration and Operation
125
ICR Threshold
The ICR Threshold setting switches the sensitivity of the IR cut filter. Select one of the following
settings from the drop-down list:
 Low
 Mid
 High
Click Set to confirm the setting.
Zoom
Select Wide or Tele. Then drag the cursor on the Zoom bar to set the zoom level, which is displayed
in the window (x1..x30).
Focus
Select one of the following settings: Auto, Manual, Near, or Far.
7.5.11 Camera – Misc2 (Miscellaneous Settings Menu 2)
Camera – Misc2 screen on all units except the CP-4221-301
On the Camera-Misc2 page, you can set the following camera parameters:
 WDR
 Auto Calibration
 Noise Reduction
 OSD
 Set Pan Zero
 TV System
Figure 109: Camera – Misc2 Screen (all units except CP-4221-301)