Installation guide

Configuration and Operation
105
Video OCX protocol setting options include:
 RTP over UDP
 RTP over RTSP (TCP)
 RTSP over HTTP
 MJPEG over HTTP
 Multicast mode
o For all units except the CP-4221-301, enter the following parameters:
 Multicast IP address
 Multicast H.264-1 video port
 Multicast H.264-2 video port
 Multicast MJPEG video port
 Multicast MJPEG audio port
 Multicast TTL
o For CP-4221-301, enter the following parameters:
 Multicast H.264-1 video address and port
 Multicast H.264-2 video address and port
 Multicast MJPEG video address and port
 Multicast audio address and port
 Multicast TTL
Note:
MJPEG is not supported by Latitude.
Click Save to confirm the settings. Click Save to confirm the settings.