User manual

7700 Series Unit Casing Description

1 BNC jack: Video In (transmitter) or Video Out (receiver), for connecting a video source or an analog video

monitor

2 RS232/485 5-pin terminal block: for communication with external devices and configuration via terminal

software

3 2-pin terminal block: for powering the unit, particularly with a power brick and a wiring harness. The unit

can also be powered through the 10-pin block. Do not power the unit through both terminal blocks at the

same time.

4 Reset button for restoring the unit to factory default settings

5 10-pin terminal block for audio, alarms, relay and power supply. The unit can also be powered via the 2-

pin block. Do not power the unit through both terminal blocks at the same time.

6 Operating status LED (yellow) - lights up when the device is ready for operation

7 Network connection LED (green) - lights up when the device is connected to the network

8 Data transfer LED - flashes yellow when data is transmitted over the network

9 RJ45 jack for connecting to the network

1 3

4 5

6 7 89