User manual

50
Receiver Operation 9
The Decoder connection page
After the connection has been established, the Decoder connection page will be displayed.
Preview
This area displays a snapshot of the video image from a selected transmitter currently online. In addition to the
unit name, the snapshot provides other means of identifying the encoder.
Monitor
The video feed currently seen on the connected monitor is shown here. As soon as a connection is made to a
transmitter, you will see the video from the selected encoder here.
Connection between the receiver and transmitter
During startup the decoder automatically scans the network for available encoders. As soon as a transmitter
is found, the unit connects to it automatically. All the transmitters found are listed in the dropdown list labeled
Available sender units.
Establishing a connection
– Choose a transmitter from the list of Available sender units. A JPEG snapshot from the video source
selected will appear on the start page under Preview.
– Click Connect to begin displaying the video feed on the connected analog monitor and the Monitor window.
Terminating a connection
– Click the icon with the red x to stop the video display on the monitor.