User manual

48
– Click the relay symbol next to the video image to activate the relay output. The symbol will turn red when
the relay is activated.
Event messages
The Event display field is where event and alarm status messages are listed. These messages can be saved
(see page 35).
General messages
The General messages field contains information about the operating status of the 7700 Series unit and the
connection. These messages can be saved (see page 35).
Control functions
Control options for peripheral devices (such as PTZ motors) depend on the type of device installed and the
configuration of the 7700 Series unit.
If a controllable device (such as a dome camera) is configured and connected to the unit, the controls for the
device are displayed next to the video image.
– To control a peripheral device click the appropriate operating elements.
Panoramic view
If you are working with a Sony EVI-D100 or EVI-D30/31 camera, you can display a panoramic image. The
panoramic image is shown in the upper part of the Video Viewer. It consists of five single images that can be
updated any time.
– Right-click on the panoramic image to open the context menu.
–Select Start scan to update the individual images. Stop scan cancels the update.
Note
The panorama image is displayed only if Show panorama view is selected on the configuration home
page Video Viewer configuration (see page 34).
Saving snapshots
Individual images from the current video sequence on the Video Viewer can be saved in JPEG format on the
computer's hard drive.
– Click the Snapshot symbol. The image will be saved. The storage location depends on the configuration of
the 7700 Series unit (see page 34).