User manual

39
Monitor settings
The monitor name is used for easier identification of the monitor. The video standard for the connected monitor
can also be selected here.
Warning!
Be sure to choose the correct video standard to avoid damaging the monitor.
Audio configuration
In addition to video data, the unit can also receive audio signals. An additional bandwidth of about 80 Kbps is
required.
Note
Audio signals can only be received if the audio function is also enabled on the transmitter (see page 24).
Activate audio:
Select On to receive audio in addition to the video data.
Alarm sources
Alarm input 1:
Select On if the alarm is to be activated by external alarm sensor 1.
Furthermore, you can choose whether the alarm is to be activated by an Active high or Active low voltage
level.
Enter a designation for the alarm input in the Name field. This name will be shown in the Video Viewer next to
the associated alarm icon.
Alarm input 2:
Select On if the alarm is to be activated by external alarm sensor 2.
Furthermore, you can choose whether the alarm is to be activated by an Active high or Active low voltage
level.