User manual

• Off

No relay triggering by events

• Connection

Triggering caused bby connection establishment

• Video alarm

Triggering caused by loss of the video signal

• Motion alarm

Triggering caused by the motion alarm

• Local input 1

Triggering caused by alarm input 1

• Remote input 1

Triggering caused by a relay contact at the target location (only when a connection is established)

• Unified picture

Triggering caused by a lack of contrast in the picture

Relay name:

A name can be assigned to the relay in this field. The name will be shown on the button under Trigger relay.

The Video Viewer can also be configured to display the name next to the relay icon.

Trigger relay:

Click the button to switch the relay manually (for example, for test purposes or to operate a door opener).

COM1 serial data port / COM1 interface settings

The serial interface port RS232/485 can be configured to suit your specific requirements.

Serial port function:

Select a controllable device from the list. If you want to use the serial interface to transmit transparent data,

select Transparent. To operate the 7700 Series unit with a terminal, choose Terminal.

Note

After selecting a unit, the remaining parameters in the window are set automatically and should not be

altered.