User manual

21
Camera name
The camera name simplifies identification of the remote camera location, for example in the event of an alarm
call. It can be shown in the video image if this feature is enabled and configured (see page 21).
Display stamping
Various overlays and stamps can be added to the video to provide important supplemental information. These
overlays can be enabled individually and arranged on the image in a clear manner.
Camera name stamping:
This field sets the position of the camera name overlay. It can be shown at the Top or the Bottom, or it can
be set to Off if no overlay for this information is to be shown.
Time stamping:
This field sets the position of the time and date overlay. It can be shown at the Top or the Bottom, or it can
be set to Off if no overlay for this information is to be shown.
Alarm mode stamping:
Choose On if a text message should be overlaid in the event of an alarm.
Displayed alarm message:
Enter the message to be displayed for an alarm. The field can contain up to 31 characters.