User manual

18
The basic use of the configuration pages is described below. Separate descriptions of the individual
configuration pages and customizable parameters for transmitters and receivers can be found in Kapitel 6 and
Kapitel 7 of this user guide.
Navigation
You can switch to the Configurator from the Settings page.
– Click the Configurator link. The initial page will be opened.
– Click one of the links on the left of the window. Other subordinate links will be shown.
– Click one of the links. The corresponding page will be opened.
Making changes
Each configuration page shows the current settings. You can change the settings by entering new values or
by selecting from predefined lists. After each change, click Set to save the change.
Warning!
Save each change with the associated Set button. When Set is clicked, only the changes in the relevant
(blue-bordered) field are saved. Changes in all other fields are ignored.