User manual

16
– Enter the user name and password in the appropriate fields.
– Click OK. If the password is correct, the 7700 Series unit home page will open.
Choosing the configuration mode
There are two options for configuring a 7700 Series unit or checking its current setup:
• The Installation Wizard
• The Configurator
All settings are stored in the 7700 Series unit memory, and they are preserved even if the power is interrupted.
Use of the Installation Wizard is recommended for initial setup. It takes you step by step through the necessary
settings. It prevents critical settings for correct operation being overlooked. Moreover, each step offers brief
instructions that help with installation.
Using the Configurator is recommended only for experienced users and system administrators. All unit
parameters can be accessed in this mode. Operations that affect the basic functionality of the unit (such as
software updates) can only be performed in Expert Mode.
Note
Depending on whether the unit is a transmitter or a receiver, different home pages will be displayed. (For
the transmitter, see page 15. For the receiver, see page 15).
– Click the Settings link in the top of the Video Viewer (the home page) and choose your desired configuration
mode from the top of the page.
Configuration with the Installation Wizard
The Installation Wizard is used for step-by-step configuration of the 7700 Series unit. It will lead you through a
series of screens where you can input the necessary settings. The settings only become effective once the
entire process is completed. When working with the Installation Wizard, you can switch to another window at
any time.
The last screen of the Installation Wizard offers the option of launching the Application Wizard. The Application
Wizard helps you to configure the Video Viewer. It is used in a manner similar as the Installation Wizard.
Starting the Installation Wizard
The Installation Wizard can be launched from the Settings page.
– Click the Wizard link in the top part of the window. A new page will appear.
– Click the button in the Installation wizard field.
– Click Start to launch the wizard.