User guide

5-1
5
2
1
3
4
5
I
A
6
Transcoding Clips
With a connection to a video channel
of the VENICE server established (see
section “Connecting to the VENICE Server” on page 2-4) you can use
this channel for transcoding. For this the VENICE client software must
be in the TRANSCODE MODE (see section “Selecting the Operation
Mode” on page 2-5).
Figure 5-1: Settings, controls and configurations of the ingest mode
In the transcode mode you can convert video and audio material to dif-
ferent file formats. If possible, the file conversion will be performed in
hardware at a faster render speed.
This chapter describes how to transcode clips on the VENICE server
with the VENICE client software.
Because most items of the transcode mode are identical and
can be used in the same way as the ones available in the play-
out or ingest mode, this chapter describes the differences only.