User guide

4-18
VENICE Client Software User Guide
y If necessary, configure the input format so that it matches the signal
present at the server’s input with the Input settings items (see sec-
tion “Configuring the Input Settings” on page 4-2).
y Determine a file name and path for the file(s) to be recorded with
the Destination items as described in section “Selecting the Stor-
age Location and File Name” on page 4-5.
y If necessary, specify the essences that you want to record with the
Input select items (see section “Selecting Essences for Record” on
page 4-3).
y If necessary, set up the file format(s) of the file(s) to be recorded via
the Output settings items (see section “Configuring the Output
Settings (File Settings)” on page 4-4).
y Then activate the button SLAVE (see section “Slave Mode” on
page 2-9).
The slave mode control window will be displayed on the screen. After
this the VENICE server waits for a record command via RS-422 to begin
a capturing of the signal present at the input of the VENICE server.
To terminate the slave mode recording perform the following:
y Either send the respective command via RS-422 or terminate the
slave mode by clicking on the CLOSE button of the slave mode
control window.
This stops the capturing process right away.
The player/recorder controls provide no function in a slave re-
cording operation.