User guide

4-15

Recording Clips

y If necessary, specify the essences that you want to record with the

Input select items (see section “Selecting Essences for Record” on

page 4-3).

y If necessary, set up the file format(s) of the file(s) to be recorded via

the Output settings items (see section “Configuring the Output

Settings (File Settings)” on page 4-4).

y If not already activated, switch to the recorder controls by selecting

the tab VENICE (see section “Controlling the Devices (Player /

Recorder)” on page 4-11).

y Make sure that the recorder controls are set to the crash record

mode (see section “Recorder Controls (VENICE)” on page 4-11).

y If wanted, type in the duration that the record should last in the

DUR field.

y Afterwards press the record button ( ) of the record

controls.

The VENICE server will then start the record and as an indication for this

the characters of the position field turn red. The video overlay will show

you what is present at the server’s input, i.e. the content that is record-

ed as it will be present at the output of the VENICE server (i.e. with the

specified output video format). Once the captured clip corresponds to

the set duration in the field DUR, the record operation will be stopped

automatically. If no duration is set, you can terminate the record man-

ually whenever you want by clicking the record button once again.

Once the record has finished, you can switch to the playout mode and

review the recorded material immediately: The metaclip of the captured

clip will be automatically set as the content to be played out (see section

“Selecting Content for Play-out” on page 3-2).

4.6.3 How to Autoedit Record with the VENICE Server

In the ingest mode you can perform an autoedit record with the

VENICE server while at the same time frame accurately controlling the

With the pause record button ( ) you can pause

the record in progress, and by clicking it again you can contin-

ue the record whenever you want without creating a new clip.