User guide

4-4
VENICE Client Software User Guide
4.1.3 Configuring the Output Settings (File Settings)
With the Output settings items you determine the file format(s) of the
file(s) to be recorded. By clicking on the triangle button to the left, the
necessary settings can be expanded (or collapsed):
Figure 4-4: The file format settings
They are divided into different items for audio and video.
Video File Settings
Select from the File format combo box the file format for your video
data to be recorded. Various file formats are supported and lists of them
can be found in section “Supported File Formats” on page A-3.
Depending on the selected file format additional codec or file types will
be available (to determine bit depth and/or byte order settings). If pro-
vided by the file format, select from the File type combo box the de-
sired additional codec or file type.
In case a compressed file format has been selected, you can select the
type of compression that should be applied to the recorded material
with the combo box Codec.
Once a file type/codec has been selected, you have to choose the way
a color space conversion and scaling has to be done with the combo
box Color range. It specifies whether the color space range of the re-
corded clip will be in a restricted (head) or in a full value range (full).
These settings are connected to the input settings and record
essences. Some of the file formats may not be available due to
the selected input video format and/or activated essence.