User guide

4-1
4
4
2
1
3
5
I
A
6
Recording Clips
With a connection to a video channel
of the VENICE server established (see
section “Connecting to the VENICE Server” on page 2-4) you can use
this channel for record operations. For this the VENICE client software
must be in the INGEST MODE (see section “Selecting the Operation
Mode” on page 2-5).
Figure 4-1: Settings, controls and configurations of the ingest mode
In the ingest mode you have the following possibilities at hand:
– You can configure all input related settings.
– You can control an externally connected device, for example, to
verify a position and set in- and/or outpoint.
– You can control the externally connected device for a play-out
operation while simultaneously recording with the VENICE server.
– You can set the VENICE server in slave mode for a remote con-
trolled record.
This chapter describes how to record clips on the VENICE server with
the VENICE client software.
Because most items described in this chapter are identical and
can be used in the same way as in the playout mode, the fol-
lowing sections will often just reference to the items in chapter
“Playing Out Clips” on page 3-1. However, the important dif-
ferences will be mentioned.