User guide

3-18
VENICE Client Software User Guide
These buttons initiate a fast backward or forward
operation of the external player. After activation
the buttons will change their appearance to the ac-
tive state and you may press the respective button
again to stop the operation.
Determines the speed of the played out material.
Either enter a speed in percent in the entry field to
the right or use the slider to set it.
With the Insert/Assemble combo box you deter-
mine whether data (e.g. on VTRs) should be insert-
ed or overwritten. While the assemble mode
usually overwrites all data (video, audio and time-
code) on the tape of the external device, in the in-
sert mode you can select via the Output select
settings the data that should be sent to the exter-
nal device (see section “Selecting Essences for
Play-out” on page 3-6).
Once your record is set up correctly you can start a
record operation with these buttons. Then the re-
spective button changes its appearance to its active
state and the capturing begins: In the crash record
mode it starts immediately, and in the autoedit
mode it accounts for preroll, postroll, etc. In case it
is necessary to terminate the record, you have to
click the button again.