User guide

3-1
3
3
2
1
4
5
I
A
6
Playing Out Clips
When a connection to a video channel
of the VENICE server is established (see
section “Connecting to the VENICE Server” on page 2-4), you can use
this channel to play out video and/or audio. For this the VENICE client
software must be in the PLAYOUT MODE (see section “Selecting the
Operation Mode” on page 2-5).
Figure 3-1: Settings, controls and configurations of the playout mode
In the playout mode you have the following possibilities at hand:
– You can configure all output related settings.
– You can control the VENICE server.
– You can control an externally connected device for a simultaneous
record operation (manual crash or autoedit record).
– You can set the VENICE server in slave mode for a remote con-
trolled play-out from an externally connected device.
This chapter describes how to use the DVS software to play out clips
with the VENICE server.