User guide

2-10
VENICE Client Software User Guide
It provides the same items as available for a control of the player. For a
description of them see section “Player Controls (VENICE)” on
page 3-14. Additionally the following items are available:
2.3.2 Slave Mode Control Window in Ingest Mode
In the ingest mode the following slave mode control window will be
displayed:
Figure 2-11: Slave mode control (ingest mode)
It provides the items as described below:
REMOTE
PROTOCOL
Select from the REMOTE PROTOCOL combo
box the RS-422 protocol that should be used to
control the VENICE server. You can select between
the Sony 9-pin protocol or VDCP.
For VDCP an output path has to be de-
fined. Further information about this can
be found in the “VENICE Administration
and Configuration” user guide.
This button allows you to open the VENICE con-
figurations. You can then change, for example,
RS-422 relevant settings. See “VENICE Adminis-
tration and Configuration” user guide.
This button deactivates the slave mode and closes
the slave mode control window.
REMOTE
PROTOCOL
Select from the REMOTE PROTOCOL combo
box the RS-422 protocol that should be used to
control the VENICE server. Currently only the Sony
9-pin protocol can be selected.
This button allows you to open the VENICE config-
urations. You can then change, for example,
RS-422 relevant settings.