User guide

2-8
VENICE Client Software User Guide
Operation Mode” on page 2-6). The device that should be controlled
can be selected with the tabs above the controls:
Figure 2-8: The player/recorder controls
y Set up the operation by, for example, determining in- and outpoints
for the operation.
y Then start the desired operation. Further information about all this
can be found in chapter “Playing Out Clips” on page 3-1, chapter
“Recording Clips” on page 4-1 or chapter “Transcoding Clips” on
page 5-1.
Once the operation is complete and your task is finished, you can stop
your work with the VENICE server at any time. For this you have to dis-
connect and free the video channel so that others can use it for their
work. This is described in section “Disconnecting and Freeing a Video
Channel” on page 2-12.
tabs
playout mode:
ingest mode:
transcode mode: