User guide

2-7
Basics
2
1
3
4
5
I
A
6
Figure 2-6: Operation mode configurations
When the configurations are collapsed they show you, as space per-
mits, their settings in a single line in text form (e.g. for the output set-
tings of the playout mode: SDI; 1920 × 1080p 24 SMPTE274;
16:9; YUV 4:2:2; 10 Bit ...). With a click on the buttons
showing a triangle to the left the respective settings items can be ex-
panded or collapsed.
y Use the configuration items to configure the selected operation
mode. Further information about this can be found in section
“Configuring a Play-out” on page 3-2, section “Configuring a
Record” on page 4-2 or section “Configuration Items” on
page 5-2.
Once the selected operation mode is configured properly, you can start
using the VENICE server.
2.2.5 Performing the Operation
With the player/recorder controls you can start the desired operation.
In the playout or ingest mode the VENICE server can be controlled as
well as an externally connected device, each according to its role deter-
mined by the chosen operation mode (see section “Configuring the
With the context menu invoked on a triangle button all settings
can be expanded or collapsed in a single step (depending on
the state of the triangle button).
Figure 2-7: Context menu to show/hide all settings
See also section “The ’Options’ Menu” on page 6-11.
ingest mode configurations (collapsed):
transcode mode configurations (collapsed):