Specifications

5-15
Maintenance
2
1
3
I
4
A
5
 Select DVS Rescue and press [Enter] on your keyboard.
 Once the loading has finished, you will see the DVS Rescue script
with its options on the screen. Your display should look similar to
the following:
--- DVS Rescue ---
1 - Backup on internal USB device
2 - Restore from internal USB device
3 - Reboot the system
4 - Poweroff the system
0 - Exit
Enter selection:
 To make a backup image of your system disk and save it to the
internal USB, press [1] and then [Enter] on your keyboard.
Afterwards a list of possible source devices will be detailed on the
screen. In a VENICE 2U/Element, the system device normally will be
’sda’, but on special systems it may also be ’sdb’, ’sdc’, etc.
 Enter the name of the system disk in the designated line. Just type
in sda (in other cases sdb or sdc) and press [Enter] on your key-
board.
The system will now ask you to enter the image name for the backup
image to be saved to the USB. By entering the name of an already ex-
isting backup image you can overwrite it.
 Type in the name of the image you want to save to the USB for a
later recovery. To confirm your entry press [Enter] on your keyboard.
The system will ask you to confirm your selection and whether you
want to continue:
If you do not perform any action, DVS Rescue will be loaded
automatically after 30 seconds.
Ex factory the DVS system will be delivered with ’sda’ as the
default system disk. If other configurations have been made
later or on customer request, this may be different.
Continue with the following steps only, when you are able to
identify the correct source device.