Specifications

5-8
VENICE 2U/Element Hardware Guide
 Take the new fan module at its handle and slide it back into its shaft
in the fan area.
 Re-insert the new fan module into the system by pushing it com-
pletely back into the shaft and folding down the handle again.
With the last step finished you have successfully replaced the defective
fan module. Once the system is turned on, no alarm LED should be lit
up anymore.
Only use original manufacturer spare parts. Other spare
parts might damage your system.
See to it that the fan module plugs properly into the sys-
tem’s fan interface and that, when completely inserted, the
locking mechanism snaps back into its locked position to
the left side of the handle.