Specifications

2-17

Overview

2.3.5 ATX Connector Panel

The ATX connector panel on the rear of the DVS system holds the con-

nectors of the computer system. It provides the following connections:

Figure 2-13: ATX connector panel on rear

handle With the handle of the power supply unit you

can pull the unit out of the system once it is un-

locked with the latch.

power cable socket The socket where the power cable has to be

plugged in to provide the system with power.

LED The LED indicates the state of the power supply

unit:

green Operating normally

off Standby mode

off (alarm LED

within operation

items on)

Disconnected from power

or malfunction

No. Item Explanation

1 LAN ports 1 10-Gbit/s Ethernet (optical SFP+) connec-

tion ports to connect the system to a net-

work (LAN and WAN). The upper

connector’s state (network connector

LAN 0) is indicated by the LAN 0 LED and

the lower connector’s state (network con-

nector LAN 1) by the LAN 1 LED within the

operation items (see section “Operation

Items” on page 2-6).

Please observe that you need

SFP+ modules to make use of the

Ethernet connection ports.

2 2a 3 41 5