Specifications

2-13
Overview
2
1
3
I
4
5
A
HDMI 1.4 a, providing all outputs up to 2K. When using a 2K raster on
these ports, the second video channels of the video channel pairs 1/2
and 3/4 (i.e. video channels 2 and 4, ports labelled ’HDMI 2’ and
’HDMI 4’) will not be available. This description refers to the four-chan-
nel variant of VENICE 2U.
2.3.3 Main Connector Panel
The main connector panel provides the standard in- and outputs of
VENICE 2U/Element to give you the full functionality of the system. It
holds, for example, the digital video in- and outputs (serial digital inter-
face) and the connectors for remote control.
Figure 2-10: Main connector panel on rear (left half)
VENICE Element does not provide HDMI ports and therefore
does not support 2K video material.
Pin-outs of most connectors can be found in section “Signal
In- and Outputs” on page A-9.
The following information may not be valid for all VENICE hard-
ware variants. Wherever required, not provided or optionally
available connectors are indicated for the specific system. No
indication in the table below means that the connector is pro-
vided as standard for the VENICE 2U/Element.
Item Description
Ref In 1/2 BNC connector for the reference input for
channels 1 and 2
Ref In 3/4 Same as ’Ref In 1/2’ but for video channels 3
and 4
Ref In SDI Out LTC Out SDI In
Digital Audio