Specifications

2-10
VENICE 2U/Element Hardware Guide
2.3 Overview of the Rear
This section describes the rear of the system. After a general overview
of the rear, some explanatory details about the digital video in- and out-
puts are given. Next, the main connector panel will be described, fol-
lowed by detailed descriptions of the power supply, the ATX connector
panel and the slot panel connectors.
2.3.1 The Rear of the System
This section provides an overview of the rear of the system:
Figure 2-9: Overview of the rear
The full complement of four video channels and/or HDMI out-
puts are optionally available. In its standard variant VENICE 2U
will be delivered with two video channels and not provided
connectors are covered by blind panels.
VENICE Element does not provide
HDMI connectors. SDI In
and LTC In are available for VENICE Element with the ingest
option. In its standard variant VENICE Element will be deliv-
ered with playout capability for two video channels only. The
full complement of four video channels is optionally available
(also for the ingest option). Not provided connectors are cov-
ered by blind panels.
main connector panel The main connector panel provides most of
the standard in- and outputs of
VENICE 2U/Element to give you the full func-
tionality of the system. It holds, for example,
the connectors for remote control and video
I/Os. It is in more detail described in section
“Main Connector Panel” on page 2-13.
main connector panel
slot panel connectorsATX connector panelpower supply