Specifications

2-6

VENICE 2U/Element Hardware Guide

2.2.2 Operation Items

With the operation items at the system’s front the hardware of

VENICE 2U/Element can be controlled (e.g. turned on or off). There you

can also find LEDs that allow you to assess the state of the DVS system

and the network connection, as well as an USB 3.0 connector.

Figure 2-4: Operation items overview

No. Item Explanation

1 power LED This LED lights up when the system has been

turned on and is now operating.

2 alarm LED This LED lights up when a hardware malfunc-

tion has occurred.

It is recommended to configure the

VENICE 2U/Element system for an au-

tomatic E-mail notification accounting

for all possible hardware malfunctions

such as power supply or fan failure. In

some cases no alarm buzzer will be

sounded, so you have to check the

state of the alarm LED at regular inter-

vals otherwise.

Further information about what to do

in case of a hardware failure can be

found in section “Troubleshooting” on

page A-2.

3 LAN 0 LED This LED lights up when the network connector

LAN 0 (see section “ATX Connector Panel” on

page 2-17) is connected to a network.

4 LAN 1 LED Same as ’LAN 0 LED’ but for LAN 1

5 LAN 2 LED Same as ’LAN 0 LED’ but for LAN 2

6 LAN 3 LED Same as ’LAN 0 LED’ but for LAN 3