User guide

A-2
VENICE Administration and Configuration User Guide
A.2 Supported VDCP Commands
The VENICE server can be remotely controlled via VDCP. The following
VDCP commands are supported by VENICE:
VENICE currently supports one channel per port, so commands such as
OpenPort, SelectPort or ClosePort can only be used with 1. Any not
supported command will return an ACK reply and set the ’Not Support-
ed’ status bit.
Additionally, there are DVS extensions to the VDCP commands avail-
able. For further information about them please contact DVS directly.
Command Return
CMD-1 CMD-2 Description CMD-1 CMD-2 Description
10 00 Stop 04 ACK
10 01 Play 04 ACK
10 04 Still 04 ACK
10 05 Step 04 ACK
10 06 Continue 04 ACK
10 07 Jog 04 ACK
10 08 Vari.Play 04 ACK
20 21 ClosePort 04 ACK
20 22 SelectPort 04 ACK
20/A0 24 PlayCue 04 ACK
20/A0 25 CueWithData 04 ACK
30 01 OpenPort 30 81 Grant
30/B002Next 3082NextID(s)
30 05 PortStatusRequest 30 85 Status
30 06 PositionRequest 30 86 Position
30/B0 07 ActiveIDRequest 30 87 ActiveID
30 08 DeviceTypeRequest 30 88 DeviceType
30 10 SystemStatusRequest 30 90 SystStatus
30/B0 11 ListofID(s) 30 91 FirstIDs
50/D0 66 PrepareIdToPlay 04 ACK