User guide

4-6
VENICE Administration and Configuration User Guide
4.2.4 Remote VTR/HDR Settings
The Remote VTR/HDR settings can be used to adapt the behavior of
the currently connected video channel of the VENICE server to a certain
type of VTR/HDR. Then the video channel will observe the settings
when controlling the external device.
Figure 4-5: Remote VTR/HDR settings
It provides the following items:
combo box Lists already configured external device pro-
files. When selecting one from the drop-down
list, its settings will be displayed below and ap-
plied to the video channel.
AUTODETECT Tries to identify the connected external device.
If a device with an identical ID, preroll and edit
lag can be found among the already configured
device profiles, it will be automatically selected
in the combo box and its settings will be dis-
played. If the device could not be identified,
you will be asked to enter a name for the new
device.
ID string Indicates and sets the ID of the device.
Preroll Sets the preroll time of the external device, i.e.
the time needed by the device to bring it to the
correct speed for the operation.
Editlag Sets the edit lag (edit delay) of the external de-
vice, i.e. the time it takes for the external device
to respond to a command.