Specifications

2-14
ProntoXway Hardware Guide
Ch. 2 RMT In DB-9 connector (female), serial RS-422 inter-
face for an input of slave control signals for vid-
eo channel 2
Ch. 2 RMT Out DB-9 connector (female), serial RS-422 inter-
face for an output of master control signals for
video channel 2
HD In B 1 BNC connector for an input of digital video sig-
nals (serial digital interface, port B) for video
channel 1; input of the second stream of YUVA
or RGB[A] in dual-link mode; port A can be
found among the slot panel connectors (see
section “Slot Panel Connectors” on page 2-16)
HD Out B 1 BNC connector for an output of digital video
signals (serial digital interface, port B) for video
channel 1; output of the second stream of
YUVA or RGB[A] in dual-link mode; port A can
be found among the slot panel connectors (see
section “Slot Panel Connectors” on page 2-16)
CVBS Out 1 BNC connector for a composite video burst sig-
nal for video channel 1 when an SD video
mode is selected (no down-converted signal),
either analog output of SD video or used for
synchronization purposes
HD In B 2 BNC connector for an input of digital video sig-
nals (serial digital interface, port B) for video
channel 2; input of the second stream of YUVA
or RGB[A] in dual-link mode; port A can be
found among the slot panel connectors (see
section “Slot Panel Connectors” on page 2-16)
HD Out B 2 BNC connector for an output of digital video
signals (serial digital interface, port B) for video
channel 2; output of the second stream of
YUVA or RGB[A] in dual-link mode; port A can
be found among the slot panel connectors (see
section “Slot Panel Connectors” on page 2-16)
CVBS Out 2 BNC connector for a composite video burst sig-
nal for video channel 2 when an SD video
mode is selected (no down-converted signal),
either analog output of SD video or used for
synchronization purposes
Item Description