DVS Digital Motion Detect Video Record System INSTRUCTION MANUAL PLEASE READ CAREFULLY AND SAVE This manual contains important information about this product's operation.
CONTENTS Note before Use Notice..................................................................................01 Function..................................................................................01 Using range...............................................................................01 Parts include in package...........................................................01 Technical Data............................................................................
Unit Description of front Panel Technical Data Model LCW-503 Power DC12V Working Current 250mA Working Temperature -10°C- +50°C Normal Capacity 128Mb SD Card Max. Capacity 32GB SD card Picture Form JPEG Picture Element 640×480/D1 Video Form AVI Frame Element 320×240/D1 Frame Rate 30fps Record Time 10s/pc Compress Method Motion JPEG Record Signal Two Way Audio Video input Audio input 600Ω Typ Video output Audio output 600Ω Typ Dimension 155x95x30mm Weight 135g 1.
Menu Connecting the Device Connecting indicates: 1, Use vide cable to connect monitor into video output port Part 1: Manual Capture Part 4: Advanced Setting Part 2: Auto Capture Part 5: Time/Date Setting Special adapter of DC12V TV/monitor Camera Part 3: Motion Detect 04 05
Auto Capture Setup Manual Catpure Setup 1, Press MENU, enter into Manual Catpure setup interface 2, Use UP/DN key to select Photo 1,press OK/SHOT key to capture for 1 picture 5, Use UP/DN key to select Movie Clip, press OK/SHOT key to begin/stop recording, saving for several I minute AVI videos, 1, Press LF/RT key to enter into Auto Capture setup interface 2,Press OK key to enter into Auto capture interface, use UP/DN key to select Auto Capturet On/OFF 5, Press OK key to enter into Master Capture Mode
Auto Capture Setup Auto Capture Setup 12, Use UP/DN key to select prerecord for 10 seconds.
Motion Detect Setup Motion Detect Setup 1, Press LF/RT key to enter into Motion detect interface 6,Use UP/DN key to exit Range 2, Use UP/DN key to select Range 7,Use UP/DN key to select TimeSlot 3, Press OK key to enter into Range interface,use UP/DN key to select MD range for whole screen 10,Use UP/DN key to select internal time for 5 seconds 15,Use UP/DN key to select Level of Sensitivity for High 11,Use UP/DN key to exit Timeslot 16,Use UP/DN key to Exit Sensitivity interface 12, Use UP/DN key
Advanced Setting Advanced Setting 1,Press LF/RT key to enter into Advanced setup interface 6, Use UP/DN key to select Movie Quality interface 2,Press OK key to enter into Photo Quality interface, use UP/DN key to select High Quality 7, Press OK key to enter into Movie Quality interface, use UP/DN key to select QVGA 12, Use UP/DN key to select PAL system 8, Use UP/DN key to select DI 13, Use UP/DN key to exit TV Output Standard interface 4, Use UP/DN key to select Low Quality 9, Use UP/DN key to Ex
Time/Date Setting Preview Mode 1, Press LF/RT key to enter into Time/Date Setting interface 5, Use UP/DN key to select Movie TimeStamp interface 2,Press OK key to enter into Set Time/Date interface, use UP/DN key to set Time/Date 6, Use UP/DN key to select Movie TimeStamp On/OFF 1, Press MODE key, enter into preview Mode interface 6, Use UP/DN, LF/RT key to select browse file 2, Press ZOOM key, enter into preview folder directory 7, Press MENU/OK key to open browse file 3, Select Folder directory,
Delete One Mode 1, At preview Mode, use UP/DN, LF/RT key to select file 2, Press MENU key to enter into playback menu, use UP/DN to select File Delete Delete All Mode 6, Use LF/RT key to select Yes key to delect 1, At preview Mode, use UP/DN, LF/RT key to select file 6, Use LF/RT key to select No to quit delete interface 7, Use LF/RT key to select No to quit delete interface 2, Press MENU key to enter into playback menu, use UP/DN to select File Delete 7, Use UP/DN key to select Cancel, press MENU ke
Format Memory 1, Press MODE, enter into preview Mode 4, Press MENU key to open Format menu 2, Press MENU key, enter into Playback Menu 5, Use LF/RT key to select Yes, all files will lose 3, Use UP/DN key to select Format 6, Use LF/RT key to select No, press MENU key to exit DVS DIGITAL MOTION DETECT VIDEO RECORD SYSTEM 18
