User guide

5-42
CLIPSTER I/O Tool User Guide
Figure 5-22: Options for the build-up process
When the check box Keep not needed clips at the bin is disabled, all
clips not used during the build-up of a timeline will be deleted from the
bin, i.e. afterwards only the clips present in the timeline will remain in
the bin. If it is enabled, clips that are not needed for the timeline of the
Edit Tool will remain in the bin.
With the check box Do not change timeline offset you can keep a
timeline offset set in the capture list. If the check box is enabled, the
timeline offset determined by the very first timeline element will be
maintained: For example, if the first timeline element starts with
01:00:00:23 (destination inpoint), you will receive a gap of about an
hour in the built-up timeline until the first timeline element starts. If the
check box is disabled, the timeline will start at 00:00:00:00, i.e. the
timeline offset will be deducted from all timeline elements in the cap-
ture list.
The Track and Change combo box will be available as soon as another
radio button is selected than the one to create a new project. With
these items you can choose other video tracks than the first one for the
build-up and influence the behavior of the remaining tracks.
Figure 5-23: Options for the build-up process
With the combo box Track you can select another track than the first
one to be used for the timeline to be built. Of course, for this the time-
line area of the Edit Tool must already be configured to contain more
than one video track (see “CLIPSTER Edit Tool” user guide for more in-
formation).
Via the combo box Change you can configure the behavior of the re-
maining tracks. It offers the following settings possibilities:
only specified
track
This setting will alter the video track that is se-
lected via the Track combo box only. All other
available tracks are not changed and will keep
their contents as it is.