User guide

5-39
2
1
3
5
4
6
7
Capturing Clips
I
A
The Button ’Create…’
The button CREATE… makes it possible to generate a project’s timeline
from a given capture list, EDL or cut list in the Edit Tool. As soon as a
list has been processed in a record/conforming operation (see section
Figure 5-20: Configuring the capture list
In the ’List Properties’ window select the col-
umns that you would like to see in the table of
the capture list by activating/deactivating the
available check boxes. Furthermore, you can
configure the default head and tail that will be
recorded together with each clip. After a record
the clip will provide the stated length before and
after the defined in- and outpoint, for example,
for transition purposes.
Usually, a once processed capture list cannot be processed
again. However, by selecting single rows from the capture list
you can record the selected clips once more. Please note that
previously recorded clips will not be overwritten normally. In-
stead they will be recorded anew and receive another clip
name via their self-incrementing consecutive number (see sec-
tion “Storage Information” on page 5-9). However, this be-
havior can be configured to your liking (see section “Name
Options” on page 5-15).