User guide

5-38
CLIPSTER I/O Tool User Guide
Save Capture-
List…
The selection of this menu option saves a cap-
ture list of the I/O Tool to a file. Enter in the
opening dialog window a storage path and a file
name for the capture list to be saved. Then con-
firm your settings with the button SAVE and the
capture list will be saved to the specified loca-
tion.
All information that an EDL or cut list
may provide, such as dissolves to black,
freezes, speed changes, etc., are saved
in a capture list as well.
A capture list together with other set-
tings made in the I/O Tool can also be
saved in a project file (see section
“Project Files/Global Settings and the
I/O Tool” on page 2-11).
Clear Capture-List With the menu option Clear Capture-List you
can delete all entries in the capture list table.
Then you can start, for instance, to set up a new
list via the selection area of the Batch record
mode (see section “Composing a Capture List in
the Batch Record Mode” on page 5-54).
Shift… This menu option allows you to shift the source
in- and outpoints of the entries available in the
capture list table. Only the source in- and out-
points will be altered, not the destination
in-/outpoints. The value for the shifting has to
be entered in frames and positive as well as neg-
ative values are allowed.
Settings… You can configure the view of the capture list ta-
ble displayed in the tool area of the I/O Tool
with this menu option. The following window
opens after its selection: