User guide

5-37

Capturing Clips

Figure 5-19: Cut list conversion options

In this window select the conversion options ac-

cording to the cut list to be imported, e.g. in

which data fields the reel name or the source in-

and outpoint are stored. Once finished the cut

list will be loaded and translated into the capture

list format.

Merge Cutlist… Contrary to an EDL a cut list also stores keycode

information which can be used in the I/O Tool

for an online-conforming. With the menu op-

tion Merge Cutlist… you can get the keycode

information stored in a cut list and pass it on to

an EDL (merging of an EDL with a cut list). For

this the respective EDL has to be present in the

capture list table. Then click on the menu option

Merge Cutlist… to open the dialog window for

the selection of a file and select the desired cut

list for a comparison. Once you have confirmed

your selection with the button O

PEN, the cut list

will be compared with the present EDL and its

keycode information are retrieved and added to

the capture list of the I/O Tool.

To merge a cut list with an EDL the in-

put video format has to be set to the

correct video raster and frame rate (see

section “The Video Format” on

page 5-4). Otherwise a merging will

not be performed properly. A correct

frame rate is necessary for a compari-

son of the different files.

Load Capture-

List…

This menu option allows to load an already

saved capture list again. Select from the opening

dialog window the respective file and confirm it

with the O

PEN button. The capture list will then

be loaded to the capture list table of the tool ar-

ea.