User guide

5-32
CLIPSTER I/O Tool User Guide
Figure 5-15: The I/O Tool in Batch record mode
First, this section explains the tabs and their items that are especially
available in the tool area of the I/O Tool when the Batch record mode
is activated. This will be followed by explanations of the further settings
available in the selection area of this mode. The section will be conclud-
ed with some task descriptions how to perform a record in this mode.
5.5.1 The Tool Area in General
After clicking on the button BATCH in the I/O Tool the Batch record
mode is activated and the tool area as well as the selection area change
their appearance. The tool area then provides additional tabs and the
Capture tab will be activated automatically.
Figure 5-16: Tabs of the tool area in the Batch record mode
The additional tabs of the tool area provide the tools to administer a
batch and offer you the possibility to switch easily between them. With
tool area selection area