User guide

5-30
CLIPSTER I/O Tool User Guide
I/O Tool up to the point of the set outpoint/duration. During the record
the numbers of the Rec field in the control area turn red and show you
the current duration of the record. Once the outpoint is reached, the
record will be terminated and a thumbnail of the recorded clip will be
displayed in the contents area of the bin.
To terminate the capturing manually you have to click the ac-
tivated RECORD button again. Then the record operation stops
immediately.
If frames or samples of audio were dropped during the record,
i.e. they could not be written to the storage, you will be asked
by the program automatically after the record procedure has
ended whether you want to re-capture the missing data. Fur-
ther information about this can be found in section “Automatic
Re-capturing” on page 5-66.