User guide

5-16
CLIPSTER I/O Tool User Guide
Figure 5-9: Options to configure clip names
If not already set as wanted enter in the entry field Name a clip name
prefix. It is the same setting as the Name field of the storage informa-
tion (see section “Storage Information” on page 5-9 for further infor-
mation).
By activating or deactivating the Name extensions check box you can
add variable and/or static components to the clip name:
combo box The upper combo box is used to assemble the
name extensions. By positioning the cursor or
marking variables/separators via a double-click
of the mouse in this field, the extensions can be
assembled or edited using the items described
below.
Additionally, the drop-down list of this combo
box provides some predefined extensions. The
last ten assembled and confirmed name exten-
sions can be found here as well. They will be
available for the duration of the project and
saved together with the project file/global set-
tings (see section “Project Files/Global Settings
and the I/O Tool” on page 2-11).