User guide

4-12
CLIPSTER I/O Tool User Guide
overlay of the control area. To stop the play-out operation manually
you have to click the play button again.
The video overlay normally shows what will be given out at the
output(s) of the DVS system. Thus its layout is that of the cur-
rently set output video raster. It may have an effect on the im-
ages displayed in the video overlay (e.g. they may get
cropped). To see the input signal as it is truly available at the
inputs of the DVS system, you should lock the output video
raster to the input video raster (check box Lock to Input, see
section “The Video Format” on page 5-4).