User guide

2-12
CLIPSTER I/O Tool User Guide
You can save a project file with the menu option Save or Save As…
on the Project menu of the menu bar. The global settings can be saved
via the menu option Save global settings… on the Options menu.
For further information on both see the “CLIPSTER Edit Tool” user
guide.
Source Timecode/Keycode
Further information about source timecode and keycode in general and
their storing in file headers of video files can be found in the “CLIPSTER
Edit Tool” user guide.
Information Saved by Global Settings
The following information will be saved by the global settings only:
– The view on a particular module/task mode (snapshot). The view
will be restored again after loading the global settings.
Because the optionally available VTR task mode of the
I/O Tool uses project files different from the ones usually
saved via the DVS software, some of the above mentioned in-
formation are not saved in a project file of the VTR task mode.
Further information about this task mode and its project files
can be found in chapter “The VTR Task Mode” on page 7-1.