User guide

7-37
2
1
3
4
The VTR Task Mode
I
A
6
5
7
Figure 7-18: VTR timeline project in Edit Tool
You can then work with your VTR timeline project in the Edit Tool same
as with any other project.
When opening a VTR timeline project in the Edit Tool, you will
in essence open a new project file. Therefore, when you select
the Save menu option or after queried by the program wheth-
er to save the project file, you will be asked to specify a new
name for the project file. Then enter a different name and/or
location for the project file to be saved. You will need a new
name/location because the Edit Tool stores project files differ-
ently compared to the ones used in the VTR task mode. If the
original VTR timeline project file is simply overwritten, it cannot
be loaded again as a VTR timeline in the VTR task mode any
more. Instead you have to use the *.vtr file of this VTR time-
line to restore it (see section “File and Directory Structure of
VTR Task Mode Projects” on page 7-13).