User guide

7-6
CLIPSTER I/O Tool User Guide
be restored. After this you can continue your work with the VTR time-
line (see section “Using the VTR Task Mode” on page 7-30).
7.1.2 The VTR Timeline Settings in Detail
During the creation of a new VTR timeline (see section “Creating a
New VTR Timeline” on page 7-3) you will be asked to determine the
base VTR timeline settings. For this the following window will be dis-
played on the screen:
Figure 7-4: VTR timeline settings
In the displayed window select a video input raster and specify further
details about it such as the synchronization or the timecode specifica-
tions if applicable. After this enter the path to the project’s directory and
the timeline’s name (i.e. the name of the project file) as well as further
details that should be used during the capturing of video material.
Further and more general information about the video format
settings in the VTR task mode can be found in section “Video
Format Settings for In- and Output” on page 7-15.
video settings
video file settings
audio file settings
in-/output tabs
general settings