User guide

6-14

CLIPSTER I/O Tool User Guide

Figure 6-7: The bin mode

y To activate the review/play-out of the clip use the play button of

the controls ( ).

Then the contents of the clip is shown in the selected video format and

in real time in the video overlay as well as at the outputs of the DVS

system.

6.2.2 How to Play Out the Timeline

After clicking on the button PLAYOUT in the I/O Tool the Play-out task

mode is activated and the selection area to the right of the task mode

buttons shows the settings that are provided in this mode. To play out

the timeline of the Edit Tool perform the following:

y Specify the settings necessary to play out the timeline of the Edit

Tool as detailed in section “The Settings” on page 6-2. At least the

following specifications have to be made:

– Set the desired video format for the output with the button

IDEO FORMAT…,

A play-out of the bin clip can also be started or stopped with

a click of the mouse on the video overlay or the upper part

of the control area.

For this a timeline must be appropriately prepared in the Edit

Tool, i.e. it must contain clips. Further information about this

can be found in the “CLIPSTER Edit Tool” user guide.