User guide

5-62
CLIPSTER I/O Tool User Guide
Source TC Frame Number This setting searches for clips that
are stored in the stated directory
(field Path). Only the indicated di-
rectory is searched and subdirecto-
ries are disregarded. All clips found
in this directory will be added to the
bin. During the build-up of a time-
line this setting will use the frame
numbers provided by the file names
of the clips added to the bin and
create the timeline by matching
them with the timecode informa-
tion stated in the capture list.
Source TC This setting searches for clips that
are stored either directly in the di-
rectory selected via the field Path
or in one of its subdirectories, i.e.
one further subdirectory level will
be searched. When clips are found,
their source timecode information
of the file headers will be compared
with the timecode information of
the capture list (source in-/out-
points). If they match, the clip will
be added to the bin and marked as
recorded in the capture list.
Keycode This setting searches for clips that
provide keycode information in
their file headers. It performs the
same operation as the setting
Source TC, but with keycode in-
stead of source timecode.
File Number This setting is only available when
Disk Online is selected. It
searches for clips in the directory
selected via the field Path and one
further subdirectory level. When
clips are found, their frame/file
numbers are compared with the
timecode information (source
in-/outpoints) provided by the cap-
ture list. If they match, the clip will
be added to the bin and marked as
recorded in the capture list.
Table 5-2: Settings for a conforming (cont.)
Column Setting Description