User guide

5-48
CLIPSTER I/O Tool User Guide
The table shown when the Matrix tab is activated provides the follow-
ing columns:
Reel Specifies the exact source of the video material. The reel
name indicates, for instance, different tapes from a VTR.
If no reel name is provided by the capture list, EDL or cut
list, ’undefined’ is given out instead. To avoid conflicts
due to identical source timecodes/keycodes during an
online-conforming the reel names stored in file headers
can be checked. Further information about this can be
found in section “Troubleshooting a Conforming Pro-
cess” on page 5-65.
Source Points to the location of the source material. The follow-
ing locations are possible with the DVS system:
VTR Records the clips of this reel via RS-422
from an externally connected player.
Disk Online Does not record the clips of this reel but
searches for clips in the specified loca-
tion (Path) and adds them to the bin,
i.e. links new bin clips to clips already
available on a storage (online-conform-
ing).
None The clip entries of this reel are ignored
in the batch: Neither are the clips re-
corded or searched for nor will they be
used when creating a project’s timeline
(see section “The Button ’Create…’”
on page 5-39).
VTR-Project Does not record the clips of this reel but
adds a 24-hours clip of the respective
VTR timeline project (see chapter “The
VTR Task Mode” on page 7-1) to the
bin (online-conforming). For this you
have to specify in the column Path the
path and file name of the VTR timeline
project.
Source TC When Disk Online or VTR-Project is selected as a
source, you have to state here the method for the on-
line-conforming. The following settings are possible:
When using the following settings with VTR-
Project, the field Path must point to the VTR
timeline project file. Then the software will find
the respective material automatically.