Specifications
2-16
CLIPSTER Hardware Guide
REF In BNC connector for a synchronization of video
signals, i.e. the reference input; input of hori-
zontal or composite sync depending on soft-
ware settings
R/Pr Out BNC connector for an analog output of red in
RGB or chroma (R – Y) in YUV
G/Y Out BNC connector for an analog output of green
in RGB or luma (Y) in YUV
B/Pb Out BNC connector for an analog output of blue in
RGB or chroma (B – Y) in YUV
Sync Out BNC connector for a synchronization of video
signals (bilevel as well as trilevel); output of
composite sync (S)
SD/HD-SDI
Out 1/A
BNC connector for an output of digital video
signals (serial digital interface, port A); either
output of YUV in single-link or first stream of
YUVA/RGB[A] in dual-link mode; it can be
configured to 3-Gbit/s SDI in the software
SD/HD-SDI
Out 2/B
BNC connector for an output of digital video
signals (serial digital interface, port B); output
of the second stream of YUVA or RGB[A] in
dual-link mode; with 3-Gbit/s SDI this port pro-
vides a mirror of port A
SD/HD-SDI
Out 3/C
BNC connector for an alternative output of dig-
ital video signals (serial digital interface,
port C); this port mirrors the output of port A;
can provide burnt-in information via software
SD/HD-SDI Out 4 BNC connector for an alternative output of dig-
ital video signals (serial digital interface); this
port mirrors the output of port B in dual-link
modes; can provide burnt-in information via
software
SD/HD-SDI
Out 5 - 8
BNC connectors for an output of digital video
signals in special rasters (quad HD-SDI); used,
for example, in special 4K rasters for a tiling of
the image to four separate dual-link HD-SDIs
WClk Out BNC connector for a wordclock signal output;
used for the synchronization of external audio
equipment
Item Description