Specifications

2-11
Overview
2
1
3
4
5
I
A
2.3 Overview of the Rear
This section describes the rear of the system. After an overall overview
of the rear some explanatory details about the digital video in- and out-
puts are given. Next, the main connector panel will be described, fol-
lowed by detailed descriptions of the ATX connector panel, the slot
panel connectors and the power supply.
2.3.1 The Rear of the System
This section provides an overview of the rear of the system:
Figure 2-12: Overview of the rear
DVS provides CLIPSTER systems with different rears. Your sys-
tem may differ from the shown rear views in the following.
However, the descriptions detail the connectors available on all
systems even if not present in the figures.
main connector panel The main connector panel provides most of
the standard in- and outputs of CLIPSTER to
give you the full functionality of the system. It
holds, for example, the connectors for remote
control and the video I/Os. It is in more detail
described in section “Main Connector Panel”
on page 2-14.
ATX connector panel On this panel you can find the standard con-
nectors of the computer system. It is described
in more detail in section “ATX Connector Pan-
el” on page 2-17.
987654321
RMT Out
AUX1-2
Out 8
Out 5 Out 7Out 6 WClk Out
DVI In
Sync Out
REF In
R/Pr Out G/Y Out B/Pb Out
Out 2/B Out 3/COut 1/A Out 4
Mon. 2Mon. 1
In 1/A In 2/B In 3/C
In 4
RMT In
LTC OutLTC In
Ch. 9-16Ch. 1-8
Out 1 Out 2
SD/HD-SDI
SD/HD-SDI SD/HD-SDISD-SDI
Analog
Audio
Out
Digtal
Audio
PUSH
VGA
DVI C/D
DVI A/B
power supply
main connector ATX connector slot panel
panel panel connectors