Specifications

2-7
Overview
2
1
3
4
5
I
A
page 2-8), the second six LEDs show the state of the hard disks of the
second column, and so on.
2.2.4 Faceplate
The faceplate covers the hard disks of the hard disk array.
Figure 2-7: Overview of the faceplate
The faceplate is built with an integrated backlit DVS logo which indi-
cates the state of the system, i.e. its power-on status: If the DVS logo is
illuminated, the power is turned on; if not, the power is turned off.
The top side of the faceplate is hinge-fastened, while its bottom side is
fixed with magnets. If you need access to one of the hard disks, for ex-
ample, to replace it, you just have to lift the faceplate:
Figure 2-8: Lifting of faceplate
Then you can access the hard disks of the hard disk array (see section
“Hard Disk Array” on page 2-8).
The faceplate can be removed for transport reasons (see sec-
tion “Removal of the Faceplate” on page 5-12).
faceplate backlit DVS logo