Specifications

2-3
Overview
2
1
3
4
5
I
A
Figure 2-1: Overview of the fronts
operation items With the operation items the system can be con-
trolled (e.g. turned on or off). Additionally, they of-
fer some LEDs that allow you to assess the state of
CLIPSTER as well as USB connectors for an easy
connectivity to additional devices such as memory
sticks. Further information about the operation
items can be found in section “Operation Items”
on page 2-4.
HDD LEDs The upper part of the front is equipped with LEDs
that indicate the statuses (activities) of the hard
disks of the hard disk array. Further information
about the LEDs and their meaning can be found in
section “HDD LEDs” on page 2-5.
faceplate/
hard disk array
The faceplate covers the hard disk array. If you
need access to one of the hard disks, for example,
to replace it, it can be lifted. The faceplate will be
described in more detail in section “Faceplate” on
page 2-7.
The hard disk array contains the main storage hard
disks which can be used to store video and audio
material. All disks can be replaced easily in case of
failure. The disk array is described in more detail in
section “Hard Disk Array” on page 2-8.
DVD drive The DVD drive can be used, for example, for soft-
ware installations. Further information about the
DVD drive can be found in section “DVD Drive”
on page 2-9.
DVD drive
faceplate/
HDD LEDs operation items
hard disk array
5U chassis: