Specifications

1-7
Introduction
2
1
3
4
5
I
A
Transportation
CLIPSTER is a very sensitive device. Especially the hard disks of the sys-
tem must be handled with greatest care. Therefore, observe in case of
transportation:
– Handle CLIPSTER with great care.
– Always use the original packing or a similar structured packing for
transportation as detailed in section “Packing Instructions” on
page A-15.
– Avoid shocks or vibrations during transport. For longer distances it
is recommended to use a lifting truck.
– Keep CLIPSTER as a transportation good dry.
– In the warranty period you have to keep the original packing and
use it in case of transportation.
Environmental Conditions
For error-free working and a long service life CLIPSTER needs some ba-
sic environmental conditions:
– Do not expose CLIPSTER to sources of heat, such as direct sunlight
or a radiator.
– Do not cover or obstruct the ventilation holes of the system (front
as well as rear).
– When installing the DVS system in a rack, take care that warmed up
air is conducted to the rear of the rack and properly vented away.
– Avoid areas with high humidity or dust. Best operating conditions
are given in an air-conditioned site.
– Do not expose CLIPSTER to strong electric or magnetic fields.
– Avoid areas where CLIPSTER will be subject to vibrations or shocks.